May 29th, 2026
This update gives you a clearer view of your spa’s current state and next scheduled session directly from the homepage.
✨ Improvements
Improved Spa Status Widget: The homepage now gives you a clearer view of when your spa is saving energy, preparing for a session, heating, or ready to use, along with when your next session is scheduled.
Improved water test scanner camera quality: The scanner now captures images with better quality and reliability, leading to more accurate scan results.
In-app support & feedback hub: Submit feedback, report issues, and get support directly within the app.
Disconnection status on home screen: When your spa loses connection, a clear message appears on the widget and disappears automatically once it reconnects.
🔧 Bug Fixes
Test strip selection: A test strip brand is now required before the first scan and will be remembered for future scans.
Manual value entry: Fixed an issue when entering test strip values with commas.
Rescanning flow: Fixed an unexpected pop-up appearing during scan analysis.
Validation screen behavior: Fixed a brief flashing issue during result validation.
Homepage controls: Fixed an issue where control icons could occasionally disappear from the homepage.
Control icon interaction on IOS: Fixed an issue where control icons could accidentally move on long press.
Android setup labels: Fixed incorrectly highlighted required field names during spa setup on Android.
Session activity time and duration messages: Fixed incorrect or missing information shown in the activity panel during a session.
Help page navigation: Fixed an issue where opening in-app support chat would block navigation to other sections requiring your account information.
In-app support chat overlapping: The chat widget no longer overlaps the iOS status bar at the top of the screen.
ℹ️ Related articles
May 7th, 2026
Gecko App
This update simplifies your water care experience with a new test strip scanner, clearer guidance, and more flexibility to the smart spa routines directly from the homepage.
🚀 New Features
New AI water scanner: Quickly interpret your test strips and reduce guesswork.
Guided chemical adjustments from test strips: Get clear, step-by-step recommendations to balance your water based on your test strip results.
Session control from homepage: Start and stop a session directly from the homepage.
✨ Improvements
Improved scanning guidance: Clearer steps and better guidance throughout the test strip scanning process.
Updated session widget: New design for the session widget on the homepage for a clearer experience.
🔧 Bugs Fixes
Logout error message: Fixed error pop-up appearing after logout
Apple sign-in control issue: Fixed an issue where users who signed up with Apple were unable to control the spa
ℹ️ Related articles
April 16th, 2026
Gecko App
This update improves the overall app experience with better performance, smoother interactions, and important fixes for increased reliability.
🚀 New Features
Push notifications: Stay informed with important updates and alerts directly from your spa.
✨ Improvements
Faster performance: Pages now load faster for a smoother experience.
Refreshed startup experience: Updated splash screen for a seamless app launch.
Smoother interactions: Improved animations and transitions throughout the app.
🔧 Bug Fixes
Eco mode now displays correctly and only appears when Smart Routine is not active.
Fixed an issue where the app would request permissions unnecessarily on some devices.
April 3rd, 2026
in.touch 3 module
This release resolves a specific scheduling issue affecting some users with K300, K330, and K450 keypads.
🔧 Bug Fixes
Resolved scheduling issue (K450, K300, K330 keypads)
Fixed an issue where filtration and heating schedules did not run at the expected time.
Deployment details
The rollout is currently ongoing and is expected to be completed by April-08, 2026
This update will deploy automatically to connected in.touch 3 devices.
Note: This is a firmware update for in.touch 3 hardware, not an app update.
April 2nd, 2026
Gecko App
This update helps you better manage your spa’s energy and water, with clearer insights, more flexible routines, and a simpler overall experience.
🚀 New Features
Energy savings insights
Get a clearer view of your energy savings with Smart Spa Routines.
💡Note: Energy savings will appear once enough usage data is available.
✨ Improvements
Custom Smart Spa Routines
You can now customize your Smart Spa Routines to better match your usage.Improved water management page
All water-related features are now centralized in a single water management page, making it easier to monitor and manage your spa’s water care.Simplified water status on the home screen
Water status indicators have been simplified from three indicators to one, making it easier to quickly understand your spa’s condition.Simplified menu
The menu has been simplified for easier navigation, grouping water features together.
🔧 Bug Fixes
Smart Routines now remain active in the app when water care settings are changed from the spa keypad.
Fixed a navigation issue that could occur after deleting a spa.
ℹ️ Related articles
March 19th, 2026
Gecko App
This update improves the setup experience, app performance, and overall reliability of Smart Spa features.
✨ Improvements
Simplified setup process
The in.touch home (EN) now has to be connected before creating your spa, helping prevent incomplete configurationsReduced app size
Unused resources have been removed to make the app lighter and faster to download
🔧 Bug Fixes
Smart Routines now correctly deactivate when a Watercare mode is changed from the keypad
Deleted spas no longer appear in the app
Time zone now updates correctly when switching between spas
QR code setup now only works with available in.touch home (EN) devices, avoiding set up issues
March 12th, 2026
in.touch 3 module
This firmware update improves scheduling reliability and overall connection stability between Gecko app and your spa.
📅Scheduling Improvements
Improved stability when configuring Watercare schedules
Reduced crashes when editing schedules
Improved compatibility between the mobile app and the button keypads (k300 and k450). The app schedules will now be prioritized over the pack and keypad.
🛜Control & Connectivity Improvements
Fixes for situations where users could temporarily lose control of their spa
Improved synchronization between connected devices
Deployment details
The rollout is currently ongoing and is expected to be completed by March 20th, 2026
This update will deploy automatically to connected in.touch 3 devices.
Note: This is a firmware update for in.touch 3 hardware, not an app update.
March 6th, 2026
in.touch 3 module
Bug fixes
Improved connectivity between in.touch 3 / 3+ devices and Eero routers.
February 27th, 2026
Gecko App
⭐ What’s New
in.grid: Control and change the in.grid heat mode directly from the app.
*Required: in.touch 3 Home module version 1.7.4 - More information about in.grid
Improved connection status – Clearer information about your spa's connection state
🐞 Bug fixes
Display of purge and filtration options for blower controls
Fixed an issue where the login flow could be interrupted unexpectedly
Resolved a problem preventing the "test strip guide" window from closing on iOS
Fixed pH and ORP charts not displaying correctly for trial users
Resolved notification permission issues during setup on iOS
Fixed a rare issue that could occur when deleting an account
Corrected daylight saving time scheduling issues
Resolved an issue where changing temperature mode wasn't being saved
February 27th, 2026
in.touch 3 module
⭐ What’s New
in.grid support: Connect your spa to external heating sources through in.grid, including heat pumps, central heating systems, and gas heaters.
More information about in.grid